Indian Journal of Dental Sciences

ORIGINAL ARTICLE
Year
: 2016  |  Volume : 8  |  Issue : 3  |  Page : 139--144

Evaluation of the effectiveness of auxiliary features on resistance with decreased occluso-cervical height: An In Vitro study


Aman Arora, Viram Upadhyaya, Sheen J Arora, Ritu Sangwan 
 Department of Prosthodontics, DAV Dental College, Yamunanagar, Haryana, India

Correspondence Address:
Dr. Ritu Sangwan
Department of Prosthodontics, DAV Dental College, Yamunanagar, Haryana
India

Background: Fewer studies were conducted on resistance form. This study evaluated the effect of different auxiliary features on inadequate resistance form. Aim: The aim of the study is to evaluate the resistance at 22° taper with reduced occluso-cervical height with different auxiliary features. Methodology: An ivorine tooth was prepared with computer-aided design-computer-aided manufacturing with total occlusal convergence (TOC) of 22°, shoulder finish line 0.9 mm wide, reduced occluso-cervical height, i.e., 2.5 mm, and reduced diameter. The crown preparation was subsequently modified to include interproximal grooves, interproximal boxes, and reduced TOC in the axial wall from 22° to 8° in the cervical 1.5 mm of the axial wall. A total of four groups with ten standardized metal dies were prepared for each design with the computer-aided milling machine. Standardized complete metal crowns using silicon mold were fabricated and cemented on metal dies with glass ionomer cement. The resistance of each specimen was evaluated when force was applied at a 45° angulation to the long axis of the die in a lingual to buccal direction by a universal testing machine. The values were then analyzed using one-way analysis of variance test and post hoc Bonferroni test. Results: The comparison of the mean resistance test values was done among all the groups, and there was a significant (P ≤ 0.001) difference found among the groups. Conclusion: The most effective method of enhancing resistance form preparation is to decrease the TOC of the cervical portion of the prepared axial walls. Two interproximal boxes significantly increased the resistance form. However, two interproximal grooves did not significantly increase the resistance form.


How to cite this article:
Arora A, Upadhyaya V, Arora SJ, Sangwan R. Evaluation of the effectiveness of auxiliary features on resistance with decreased occluso-cervical height: An In Vitro study.Indian J Dent Sci 2016;8:139-144


How to cite this URL:
Arora A, Upadhyaya V, Arora SJ, Sangwan R. Evaluation of the effectiveness of auxiliary features on resistance with decreased occluso-cervical height: An In Vitro study. Indian J Dent Sci [serial online] 2016 [cited 2022 Jul 2 ];8:139-144
Available from: http://www.ijds.in/article.asp?issn=0976-4003;year=2016;volume=8;issue=3;spage=139;epage=144;aulast=Arora;type=0