|Year : 2022 | Volume
| Issue : 4 | Page : 171-177
How much disinfected ground tooth do we need to fill an empty alveolus after extraction? Experimental in vitro study
José Luis Calvo-Guirado1, Felix De Carlos-Villafranca2, Miguel Angel Garcés-Villalá3, Nuria García-Carrillo4, Vidushi Jindal5, Francisco Martinez-Martínez6
1 Associate Researcher, Universidad Autonoma de Chile Researcher of Instituto Murciano de Investigaciones Biosanitarias Pascual Parrilla, Private Practice Murcia, Spain
2 Department of Orthodontics, Faculty of Medicine, University of Oviedo, Asturias, Spain
3 Department of Implant and Biomaterial Research, Fundación Corazon De Jesús, San Juan, Argentina
4 Veterinarian and Researcher of Instituto Murciano De Investigaciones Biomédicas Virgen De La Arrixaca, University of Murcia, Spain
5 Private Researcher, Murcia, Spain
6 Department of Traumatology, Hospital Clínico Universitario Virgen de la Arrixaca, Faculty of Medicine University of Murcia, Hospital Clínico Universitario Virgen de la Arrixaca, Instituto Murciano de Investigaciones Biomédicas Pascual Parilla (IMIB), El Palmar, Murcia, Spain
|Date of Submission||08-Mar-2022|
|Date of Decision||02-Jul-2022|
|Date of Acceptance||25-Aug-2022|
|Date of Web Publication||14-Nov-2022|
José Luis Calvo-Guirado
Associate Researcher, Universidad Autonoma de Chile, Private Practice Murcia
Source of Support: None, Conflict of Interest: None
Aim and Objectives: The main objective of this study was to evaluate how much crushed, extracted human teeth material can use to fill an empty alveolus of the mandibular anterior teeth. Material and Methods: Fifty-four human teeth were collected from 10 donors due to advanced periodontal disease. The patients were clinically selected, signed informed consent, and receive no financial compensation for participating in this study. Fifty-four teeth were mechanically cleaned, dried, sectioned, and grounded. All teeth are grounded using the Smart Dentin Grinder machine. Cone-beam computed tomography scanners of each patient were done and processed the standard tessellation language images by a three-dimensional (3D) printer, and 3D models were obtained. Results: The mean of each alveolus was 12.1 ± 0.34 mm for lower incisors and 17 ± 0.29 mm for lower canines. The mean values of root material we need for central and lateral incisors alveolus filling were 0.298 ± 0.14 cc, and for lower canines was 1.02 cc. Therefore, we need one root or one and half-crowns must be needed to fill a lower incisor alveolus. A lower canine needs at least one canine root or one canine crown and two lower incisors crown to fill the canine alveoli. Conclusions: Dentin is a helpful graft to fulfill an empty alveolus due to osteoinductive properties, and a ground crown is useful for buccal bone protection due to osteoconductive properties before and after implant placement.
Keywords: Ground crown, ground dentin, grounded tooth graft, Smart Dentin Grinder, teeth particles
|How to cite this article:|
Calvo-Guirado JL, De Carlos-Villafranca F, Garcés-Villalá MA, García-Carrillo N, Jindal V, Martinez-Martínez F. How much disinfected ground tooth do we need to fill an empty alveolus after extraction? Experimental in vitro study. Indian J Dent Sci 2022;14:171-7
|How to cite this URL:|
Calvo-Guirado JL, De Carlos-Villafranca F, Garcés-Villalá MA, García-Carrillo N, Jindal V, Martinez-Martínez F. How much disinfected ground tooth do we need to fill an empty alveolus after extraction? Experimental in vitro study. Indian J Dent Sci [serial online] 2022 [cited 2023 Feb 8];14:171-7. Available from: http://www.ijds.in/text.asp?2022/14/4/171/359867
| Introduction|| |
The autogenous dentin matrix was used for alveolus filling and bone regeneration in different bone defects. The use of dentin matrix in bone regeneration is based on the biochemical and structural similarities between bone and dentin/enamel. The dentin has transformed factors to induce undifferentiated mesenchymal cells to grow into bone cells to form new bones. Immediate bone grafting of extraction sockets was widely used with or without membranes to prevent crestal bone loss during wound healing. The first description of the human dentin matrix was in 2008 created from extracted human teeth related to its osteoinductive, osteoconductive, and remodeling capacity. The bone and dentin are composed of the weight and volume of collagen, hydroxyapatite, and bone proteins., All those characteristics situated bone and dentin like the same biomaterials consisting of collagen and hydroxyapatite material working as scaffolds. Autogenous bone grafts showed similar resorption rate characteristics as dentin grafts, close to 12 weeks. The resorption rate in the bone interface between dentin/bone graft and original bone showed new bone formation. Other authors explain that tooth grafts have not got additional benefits over conventional graft materials. The use in clinical practices will determine its success due to the high variability in resorption time (2–24 weeks), and the risk of graft dehiscence (12.96%–34.38%) has been observed. Most biomaterial structures need a scaffold to let the new bone establish tooth dentin and cementum structure work directly deposed on membranous surfaces, like ankylosis.,
Another way to preserve extracted teeth is by cryopreservation; this technique will maintain the dentin's hole integrity and mechanical properties compared with noncryopreserved ones.
The particulate dentin graft is an excellent material for socket preservation and another oral surgical technique. One of the unique characteristics was high bone replacement due to its resorption by the osteoinductive and osteoconductive properties in implant placement techniques. Dental implants in sites regenerated with dentin matrix showed similar primary stability to xenograft granules and equal clinical- and patient-related outcomes.
The main goal of our study was to estimate how much ground tooth after extraction we need to fill an empty socket or sockets, maintaining the crestal bone.
| Materials and Methods|| |
The study protocol with registration number 6781; 21-07-2017, approved by the Catholic University of Murcia Ethics Committee, related to using extraction teeth for in vitro studies.
Mandibular anterior human teeth were extracted from 10 patients between 60 and 70 years mean and standard deviation were (64.23 ± 0.28) including six women and four men in the study. The whole group of patients signed informed consent to donate their teeth for the study and did not receive financial compensation. The patient's teeth were diagnosed with periodontal disease in the lower six anterior teeth (number 33 to number 43). The inclusion criteria were healthy patients over 60 years of age who needed an anterior mandibular tooth/teeth extraction for periodontal reasons. Exclusion criteria are patients who do not need an anterior mandibular tooth extraction, systemically complicated patients (American Society of Anesthesiologists III, IV, and V), pregnancy or lactation, and patients who unwillingness to follow-up calls.
A total of 34 teeth were collected from 10 donors, cleaned using carbide-tungsten burs, grinding the ligament fibers attached to the root, and using an air syringe to dry all teeth [Figure 1].
|Figure 1: Teeth were cleaned using straight carbide tungsten burs, grinding periodontal ligament, and dried|
Click here to view
Each tooth was washed, dried, and ground using the “Smart Dentin Grinder Genesis” device (KometaBio Inc., Cresskill, NJ, USA) [Figure 2]. Teeth particles sized at 300 up to 1200 μm were obtained by sieving the particles into two different compartments. The teeth particles were immersed in a basic alcohol cleanser in a sterile container for 5 min to dissolve all organic waste and bacteria and then washed with sterile saline for 30 seconds twice [Figure 3] and [Figure 4].
|Figure 2: After being cleaned and dried, the teeth were grinded using the “Smart Dentin Grinder” device (KometaBio Inc., Cresskill, NJ, USA)|
Click here to view
|Figure 3: (a) Extracted teeth before grinding on a microscale (b) grinding teeth on a microscale|
Click here to view
|Figure 4: (a) Kometabio Smart Dentin Genesis Grinding Machine (b) dentin cleanser (red cap) and Buffered saline (green cap)|
Click here to view
After 5 minute of teeth particles immersion in dentin cleanser, many periodontal bacteria were eliminated in these disinfectants.,,, We observed ground particles by an optical microscope showing dust in all particles before cleaning and completed clean and transparent after that using an optical microscope (AXIO, Lab. A1 with Axiocam 305 color, Zeiss, Jena, Germany) [Figure 5].
|Figure 5: (a) Dusty tooth particle after grinding (b) cleaned particles ready to be used|
Click here to view
When the material was ready to use, we guessed how much autologous dentin graft we needed to fill each anterior mandibular extracted teeth' empty sockets. A printed mandible was used in the study after a cone-beam computed tomography scan of one of the donor's scanners. A second scanner was done to get a final model with an empty alveolus. After that, we transformed the standard tessellation language archives into printed files processed by a three-dimensional (3D) printer Formlabs 3B (Somerville, MA 02143, USA) [Figure 6]. After that, we compared the printed mandible and made the width and length measurements with the scanner measurements [Figure 7] and [Figure 8]. Finally, the ground root and roots were introduced inside the 3D-printed mandible, as shown in [Figure 9].
|Figure 6: Diagram of evaluation and filling procedure of lower anterior extracted teeth|
Click here to view
|Figure 7: (a) Original model of the patient who needs lower teeth extraction (b) 3D reconstruction (c) 3D-printed mandibular alveoli|
Click here to view
|Figure 8: (a) Measurement of mesiodistal site with a caliper (b) deep measurement with a periodontal probe (c) buccolingual measurement with a caliper|
Click here to view
|Figure 9: (a) Dentin grinder in one canine alveolus (b) particulate teeth placed in two alveoli (c) dentin graft placed in three alveolus|
Click here to view
Each grinding tooth was kept in separate sterile crystal pots, labeled with the patient's data.
Statistical analysis of this in vitro study was done by PASW Statistics v. 18.0.0 software (SPSS, IBM SPSS Statistics V.18. IBM Inc. Chicago, IL, USA). Analysis of variance one-way test was applied to compare the means and assuming a level of significance of 95% (P < 0.05). In addition, the Mann–Whitney and Kolmogorov–Smirnov tests were used to assume normality. Finally, testing mean and standard deviation were made by a descriptive test.
| Results|| |
Human lower central incisors mean measurements were 5.4 ± 0.6 mm in a spread, 1.28 ± 0.45 mm in amplitude, and scaled 0.8 ± 0.16 g, whereas lower lateral incisors mean measurements were 5.3 ± 0.28 mm in length, 1.17 ± 0.33 mm in width, 0.7 ± 0.85 mm in weight, and lower canine measurements were 6.7 ± 0.5 mm in length, 1.54 ± 0.88 mm in amplitude, and scaled 1.31 ± 0.75 mm. Data showed significant differences between lower incisors and canines, are expressed in [Table 1].
|Table 1: Descriptive test of the mean and standard deviation of each human tooth length, width, and weight of 10 patients|
Click here to view
Lower mandibular alveoli were measured in 54 places with a caliper and a periodontal probe to get the real dimensions of the alveoli as described in [Table 2]. With mean values ranged from 10–12 ± 0.34 mm to 16–18 ± 0.21 mm in deep, 7–7.5 ± 0.27 mm to 9–9.5 ± 0.43 mm in buccolingual direction, and 5–6 ± 0.22 mm to 7.5–8 ± 0.44 mm in mesiodistal direction [Table 2].
The alveoli of those six mandibular extracted teeth were used individually to know how many particulate teeth need it to fulfill the hole dental alveolus. [Figure 9] shows the amount of ground tooth required to fill one, two, or three alveoli.
Human teeth particles showed that disinfected roots and crowns increased double the particles' weight and increasing the volume. In addition, after disinfection, some pores appear all around dentin particles; explained by Calvo-Guirado et al. in 2019, 44.48% corresponded to interparticle spaces and 2.533% for particle porosity.
The mean tooth weight ranged from 0.486 ± 0.6 g for central and lateral incisors and 1.27 ± 0.4 g for lower canines. When we divided crown and root, the cutting mass loss was −0.05 g for central and lateral incisors and –0.07 g for lower canines. The mean of obtained ground root cc and a crown was 0.25 ± 0.2 cc and 0.192 ± 0.3 cc for central and lateral incisors and 0.905 ± 0.4 g and 0.296 ± 0.1 cc for lower canines, respectively. The most critical data were disinfected root and crown, 0.299 ± 0.24 cc, and 0.214 ± 0.16 cc for central and lateral incisors. The amount of disinfected root and crown for canines was 1.02 ± 0.33 cc and 0.411 ± 0.56 cc, respectively [Table 3] and [Graph 1].
Every tooth extracted needs the same root or one and a half crown to fill the socket. The canine is the exception because it needs its ground root or crown and two incisor crowns [Figure 10].
|Figure 10: Root or crowns needed to be placed for filling in every empty alveolus|
Click here to view
If we lose the lower central incisor, we need at least the same root ground or one and a half incisor crowns to stuff the alveoli fully. If we lose two lower incisors (central or lateral), we need the same two ground roots and three incisors' crowns. The last clinical relevance is that we need three roots and four crowns if we lose three teeth. When we lose all lower teeth from left to right canines, only with all particulate roots (total six), we can fulfill all sockets, and ground crowns could be used to protect buccal plates and reduce crestal bone resorption [Figure 11]. The distribution of each part of the tooth inside the alveolus revealed that different density of new bone had been founded in differents sites, the use of dentin graft has a valuable meaning because dentin with low hydroxyapatite crystallinity could be placed at the middle and bottom of all alveoli of its characteristics of osteoinduction. The ground crown with high crystallinity must be placed on top of the bone crest for osteoconduction and bone crest maintenance [Figure 12]. Finally, with one ground disinfected central incisor root 0.312 ± 0.44 cc, we can fill one alveolus; in the same situation to fill an alveolus of lower lateral incisor 0.307 ± 0.21 cc, we can fill one alveolus, but with a lower canine 0.926 ± 0.25 cc, we can fill two and a half central incisor roots.
| Discussion|| |
Teeth-derived biomaterial without antigenicity improves bone formation and remodeling capabilities. We described using ground tooth particles in extraction sockets, finding different types of bone at test sites than at control sites at 30 and 90 days.,,, A considerable range of bone graft materials available in the market has physicochemical properties related to the type of defect filling.
Other authors used dentin matrix in extraction sockets, demonstrating that it was as effective as organic bovine bone. For other devices such as tooth transformers, after grinding, particles were demineralized and sterilized using six different solutions and then were then collected in sterile 1.5 mL polypropylene tubes and stored at R. T. until use. The dentin grinder procedure is more straightforward and quicker to get the particles for grafting, avoiding any store. On the other hand, the effect of this clinical procedure has something to explain in detail related to the characteristics of time of resorption. The demineralization process augments dentin grafts' low crystallinity properties, following a similar resorption pattern rate as autogenous bone grafts for 12 weeks. Tasdemir et al. adding simvastatin on tooth graft enhances osteoinductive properties through bone morphogenetic protein-2 and O. C. expression. We agree with the authors that the partial demineralization process can enhance bone resorption and determine to the place of dentin grafts at the middle and bottom of the alveolus due to osteogenic properties. Yüceer-Çetiner et al. composite tooth graft with platelet-rich plasma protocol showing that demineralized autogenous dentin graft with platelet rich factor (PRF) increases bone formation capacity.
Furthermore, this material suffered a dimensional contraction of the postextraction socket but remained stable at 16 weeks after surgery in vertical and horizontal dimensions. Um et al., showed that the initial resorption during the healing period of auto-DDM applications was at 3 to 6 months. Furthermore, a scientific explanation related to roots and crowns was explained by Binderman and Pohl, using roots and crowns in different positions depending on the clinical needs. The amount of cc need it for a single root will be approximately the same root ground and disinfected inserted in the same clinical procedure.
| Conclusions|| |
We observed in our study that tooth particle grafts have to be used as a biomaterial for any bone defects due to their similar characteristics to the autologous bone. The amount of tooth we need to fill one alveolus is about one and a half roots to fill one socket. Dentin could be a helpful graft to fulfill an empty alveolus due to its osteoinductive properties because the resorption is quick, and a ground crown specially composed of a high percentage of enamel could be used for buccal bone protection due to osteoconductive properties because the resorption is zero before and after implant placement.
The following statements should be used “Conceptualization, Nuria García Carrillo, Jose Luis Calvo-Guirado.; Software, Miguel Garcés-Villalá.; Validation, Jose Manuel Cervera-Maillo; Methodology, Felix de Carlos Villafranca; Formal Analysis: Francisco Martínez Martínez, Nuria García Carrillo, Investigation, Jose Luis Calvo-Guirado. Jose Manuel Cervera-Maillo; Resources: josé Luis Calvo-Guirado; Data Curation: Nuria García Carrillo, Felix de Carlos Villafranca; Writing-Original Draft Preparation, Jose Luis Calvo-Guirado.; Writing-Review and Editing, Nuria García Carrillo, José Luis Calvo-Guirado; Visualization: José Luis Calvo-Guirado., Miguel Garcés-Villalá; Supervision, Jose Luis Calvo-Guirado.; Project Administration, Jose Luis Calvo-Guirado, Francisco Martínez Martínez; Funding Acquisition, Jose Luis Calvo-Guirado, Francisco Martínez Martínez.
The study passed the Ethical comitee of Universidad Catolica of Murcia 28/02/2020, Cod CE22007.
Financial support and sponsorship
Conflicts of interest
There are no conflicts of interest.
| References|| |
Pang KM, Um IW, Kim YK, Woo JM, Kim SM, Lee JH. Autogenous demineralized dentin matrix from extracted tooth for the augmentation of alveolar bone defect: A prospective randomized clinical trial in comparison with anorganic bovine bone. Clin Oral Implants Res 2017;28:809-15.
Murata M, Sato D, Hino J, Akazawa T, Tazaki J, Ito K, et al.
Acid-insoluble human dentin as carrier material for recombinant human BMP-2. J Biomed Mater Res A 2012;100:571-7.
Minetti E, Giacometti E, Gambardella U, Contessi M, Ballini A, Marenzi G, et al.
Alveolar socket preservation with different autologous graft materials: Preliminary results of a multicenter pilot study in human. Materials (Basel) 2020;13:1153.
Binderman I, Hallel G, Nardy C, Yaffe A, Sapoznikov L. A novel procedure to process extracted teeth for immediate grafting of autogenous dentin. J Interdiscipl Med Dent Sci 2014;2:154.
Min BM. Oral Biochemistry. Seoul, Korea: Daehan Narae Pub. Co.; 2007. p. 22-6.
Bhaskar SN. Orban's Orban's Oral Histology and Embryology. 9th
ed. Saint Louis Missouri, USA: Mosby Co.; 1980.
Murata M, Akazawa T, Tazaki J, Ito K, Sasaki T, Yamamoto M, et al.
Blood permeability of a novel ceramic scaffold for bone morphogenetic protein-2. J Biomed Mater Res B Appl Biomater 2007;81:469-75.
Pohl S, Binderman I, Tomac J. Maintenance of alveolar ridge dimensions utilizing an extracted tooth dentin particulate autograft and platelet rich fibrin: A retrospective radiographic conebeam computed tomography study. Materials (Basel) 2020;13:1083.
Cardaropoli D, Nevins M, Schupbach P. New bone formation using an extracted tooth as a biomaterial: A case report with histologic evidence. Int J Periodontics Restorative Dent 2019;39:157-63.
Gharpure AS, Bhatavadekar NB. Clinical efficacy of tooth-bone graft: A systematic review and risk of bias analysis of randomized control trials and observational studies. Implant Dent 2018;27:119-34.
Kim SY, Kim SG, Lim SC, Bae CS. Effects on bone formation in ovariectomized rats after implantation of tooth ash and plaster of Paris mixture. J Oral Maxillofac Surg 2004;62:852-7.
Choi DK, Kim SG, Lim SC. The effect of particulate dentin-plaster of Paris combination with/without fibrin glue in the treatment of bone defects around implants. Hosp Dent 2007;19:121-6.
Yan W, Tenwalde M, Øilo M, Zhang H, Arola D. Effect of cryopreservation of teeth on the structural integrity of dentin. Dent Mater 2018;34:1828-35.
Cervera-Maillo JM, Morales-Schwarz D, Morales-Melendez H, Mahesh L, Calvo-Guirado JL. Autologous tooth dentin graft: A retrospective study in humans. Medicine 2022;58:6.
Santos A, Botelho J, Machado V, Borrecho G, Proença L, Mendes JJ, et al.
Autogenous mineralized dentin versus xenograft granules in ridge preservation for delayed implantation in post-extraction sites: A randomized controlled clinical trial with an 18 months follow-up. Clin Oral Implants Res 2021;32:905-15.
Calvo-Guirado JL, Cegarra Del Pino P, Sapoznikov L, Delgado Ruiz RA, Fernández-Domínguez M, Gehrke SA. A new procedure for processing extracted teeth for immediate grafting in post-extraction sockets. An experimental study in American Fox Hound dogs. Ann Anat 2018;217:14-23.
Calvo-Guirado JL, Ballester-Montilla A, N De Aza P, Fernández-Domínguez M, Alexandre Gehrke S, Cegarra-Del Pino P, et al.
Particulated, extracted human teeth characterization by SEM−
EDX evaluation as a biomaterial for socket preservation: An in vitro
study. Materials (Basel) 2019;12:380.
Calvo-Guirado JL. Temporary implants and particulate dentin graft protecting traditional implants in severe periodontal patient: A case report. Indian J Dent Sci 2021;13:201-4. [Full text]
Calvo-Guirado JL, Garcés-Villalá MA, Mahesh L, De Carlos-Villafranca FA. Effectiveness of chemical disinfection in discarding pathogenic bacteria of human particulate tooth graft: An in vitro
study. Indian J Dent Sci 2021;13:277-82. [Full text]
Ramírez Fernández MP, Gehrke SA, Mazón P, Calvo-Guirado JL, De Aza PN. Implant stability of biological hydroxyapatites used in dentistry. Materials (Basel) 2017;10:644.
Bono N, Tarsini P, Candiani G. Demineralized dentin and enamel matrices as suitable substrates for bone regeneration. J Appl Biomater Funct Mater 2017;15:e236-43.
Gual-Vaqués P, Polis-Yanes C, Estrugo-Devesa A, Ayuso-Montero R, Mari-Roig A, López-López J. Autogenous teeth used for bone grafting: A systematic review. Med Oral Patol Oral Cir Bucal 2018;23:e112-9.
Taşdemir U, Kirtay M, Keleş A, Çil N, Abban G, Dodurga Y. Autogenous tooth bone graft and simvastatin combination effect on bone healing. J Craniofac Surg 2020;31:2350-4.
Yüceer-Çetiner E, Özkan N, Önger ME. Effect of autogenous dentin graft on new bone formation. J Craniofac Surg 2021;32:1354-60.
Del Canto-Díaz A, de Elío-Oliveros J, Del Canto-Díaz M, Alobera-Gracia MA, Del Canto-Pingarrón M, Martínez-González JM. Use of autologous tooth-derived graft material in the post-extraction dental socket. Pilot study. Med Oral Patol Oral Cir Bucal 2019;24:e53-60.
Um IW, Kim YK, Park JC, Lee JH. Clinical application of autogenous demineralized dentin matrix loaded with recombinant human bone morphogenetic-2 for socket preservation: A case series. Clin Implant Dent Relat Res 2019;21:4-10.
[Figure 1], [Figure 2], [Figure 3], [Figure 4], [Figure 5], [Figure 6], [Figure 7], [Figure 8], [Figure 9], [Figure 10], [Figure 11], [Figure 12], [Figure 1], [Figure 2], [Figure 3], [Figure 4], [Figure 5], [Figure 6], [Figure 7], [Figure 8], [Figure 9], [Figure 10], [Figure 11], [Figure 12]
[Table 1], [Table 2], [Table 3], [Table 1], [Table 2], [Table 3]